Відео

I know a local company here in the Netherlands that sell spoolless, i think theyre called ATA-3D, they also use the cardboard cylinders, maybe you can try to contact them to get more info on those. Its not quite USA, but its closer than china i guess

Ooooh homogeneity. Nice one. Dont see that version often and you said it right too.

Print your own spools with the transition filament.

This is a very poor design choice however you should simply include instructions for slicer settings because adding those circles is going to dramatically increase the per layer toolpath time it's going to take longer to draw each toolpath layer meaning your print is going to take a whole lot longer to print

Everything reminds me of her 😔

The topic of print farm power requirements/limitation was fascinating. 3d printers tend to operate mostly on DC power (not AC, like the grid), so each printer tends to have an independent power converter brick that has a significant amount of parasite/vampire power loss. For a print farm it may be advantageous to utilize integrate more scalable DC power source (centralized, or a few distributed units). This could also centralize the need for UPS, integrating with the DC power supply. If a location is power constrained, adding additional battery storage would allow shifting power demand in time to different part of a 24-48 period, depending on power demand as relates to peaks and valleys of production and power need. In parts of Texas (like Austin), utilizes actually pay customers to utilize power at night. This litany could pay for battery storage over time.

No, I love my brims

Oh my god, I feel this so hard. It drove me CRAZY how many of my peers in engineering schools were OBSESSED with printing everything. Everything. Precision be damned! (I like printers now, though, lol)

Or use an appropriate solvent based glue so the two surfaces chemically bond effectively becoming one continuous part. No faffing about required.

Two 3D printing GOATs. Great conversation!

I'll buy transition filament at regular cost. I want to recycle filament partly to just have weird, splotchy colors.

What about rotating the printing plate, so it never creates a shallow print surface? Is there an continuous hot plate attachment for dynamic printing surface?

The print quality on that part is so bad, why does it matter if you have a clean support release?

Triangles always try to put more triangles they’re the absolute strongest shape

Make it a screw then add glue.

🤣🤣🤣🤣🤣

Thanks for having me on, Gabe! Enjoyed the conversation and looking forward to more to come!

11:22 Western Container Corp, Yazoo Mills, Marshall Paper Tube, Spiral Paper Tube & Core, Greif. Tape and label cores looks to be what you want with the smaller length 3 inch tubes (with whatever inner diameter you're after). Most of these companies have quote request forms, so I can't quite say which one would fit your price margins the best.

🤣 So good

That mic sounds like shit i reccomend the Behringer Uphoria UMC22 and the AT2020

I don’t see any links to your interview subjects stuff in the description

Or just paint on supports

At this point, why not just forge a tomahawk?

Simulated moon regolith . . . that's got to tear up your machines pretty quickly.

I really find it hard to believe that black is 50% of sales. I almost never use black. Maybe you could survey your customers to see which colors are more useful. As I have said before, natural/clear would be cheaper for you to produce, and for me would be much more useful than black.

This is the video we’ve been waiting for.

Interesting interview. Thanks Slant 3D!

Great selection of books in the shot there!

No lie, I used to think this 2 were the same person. They are both great motivation, & teachers. :)

Again, still have the Slant Spool, still love the Slant Spool, still make the Slant Spool (in house only, we aren't jerks), still use the Slant Spool. Thank you.

I ordered a 3 pack of 1kg spools and my 3 kids were stoke with the little gifts inside. They told me to be sure to order more filament from you lol. Being the new Cracker Jack (and not lame) is a fun idea. I do find it funny that a 3d printing company contains Chinese made molded toys.

Wow, I always thought these were the same two guys!! 😂

2kg down on my filament. No clogs or issues

I know it's not high on your priority, but I'm waiting on boxes to show up to send back a bunch of empty spools (1kg, and in time 3kg) That should have arrived this last week. We'll see.

What 3d software do you use?

"that's a good question" "that's fair" 😆

This is gonna be harsh feedback but why so high stress 🫨 some real make your bed energy 🙄 what is soooooo serious? I'm interested in the content but the vibe is like a department store supervisor or 7/11 manager reprimanding their employees or stressed out because the big boys are coming or a deals gonna go through. Are you a creator or a corporate stiff? 🤔 I get it, business is business, but I wouldn't want to work with you because it's like you had 12 cups of coffee and your wife had twins. It would make sense if you were like a weapons dealer or something. Anyway hope alls well

Hybrid inverters will be a good UPS. Also, using solar makes sense.

Good job!! You should do this more.....

That's a great tip.

Great stuff, I really enjoyed the discussion and can relate to a lot of it. I manage a group at a large company that has CNC machining and 3d printing to support R&D efforts at the company. I see firsthand the challenge of training engineers to understand the limitations of 3d printing and when they should be using traditional manufacturing methods.

I got 3 of the 3kg spools and I finally feel like I’m set for a while.

It is kind of surreal the quality of the content you share here. Thank you for your videos.

Re tangled colours: I bought 3kg of black, but honestly I really, really, REALLY rarely print in black. Two out of three of the spools probably won't be opened this year. I occasionally teach a FDM 3d print class where students have the option of dozens of colour options. No student, child or adult, has even once chosen black. (White or medium gray are common choices for my own prints). On the upside, I don't think I'll need more black filament until 2026.

Me realizing the “child” playing in the tree was actually a federal agent sent to spy on my illegal boomer poaching operation

Audio quality

Sec traffickers = ok SPLC blscklist ? Go

Put it at the Angle you want, put support blocker on the sides and then hit generate support

Your filament may not be 'high speed', but it's printing great at 43mm³/s for me 🤣 (Lancer hot end)

"sir! Tim got drunk again and began trowing toys at the packing machine...we are gonna have to repack the whole batch! Gabe: nah, i got an idea..."